The majority of electrical defects generate warnings anomalies often

undetectable"to the naked eye," before creating an emergency.

When the air conditioner stops working two seconds from time to time,

nobody realizes this, but this would bethe best time to schedule the

verification of the problem. In addition, when theproblem is found,

spare parts can be ordered at a reasonable price without

being shopped "RUSH" because the entire company stopped. 

  

Energy Efficiency and Conservation Strategies.
 
Using energy as efficiently and effectively as possible will be

essential if we are to meet future energy needs and see a global transition

to sustainableenergy sources. Without major changes in the way we use

energy to meetour needs (energy conservation), and use the most efficient

equipment and measures (energy efficiency), there is little hope of

reducing the impactof energy production and use to reasonable levels.
 
Energy efficiency means providing the same services with less energy.
Fortunately energy efficiency and conservation are also the lowest cost

options for meeting energy needs and provide many other environmental,

economic and social benefits, including cost savings, lower environmental

load and land emissions associated with energy production and

consumption, local economic development opportunities and associated

new jobs, enhanced reliability of energy system and reduce price volatility,

and improved energy supply security.

Energy conservation means using less energy services.                                                                                                                                                                                   

While it is in consumer and the public interest to use energy more efficiently,

there are several reasons why energy users and providers of energy, such as

utilities, do not always make rational investments in efficient technologies

and practices. Consumers often lack the information necessary to make good

choices; also the equipment, services and financing they need are often not

available. It is left to governments, therefore, to put policies and programs in

place that encourage investments in energy efficiency and conservation and

transform markets towards energy efficient products and practices.

Prime Technologies Inc offers its customers Energy Efficiency services:
·         POWER QUALITY SURVEY, ANALYSIS, MONITORING & REPORTING SERVICES. 
·         EARTH GROUND RESISTANCE  ANALYSIS.
·         ELECTRICAL LOAD MANAGEMENT, ENERGY “LOAD SHAVING” & “PEAK DEMAND

          CONTROL  SERVICES.
·         EQUIPMENT PROCUREMENT FOR THE COMMERCIAL & INDUSTRIAL SECTOR.
 
How would you like to see your business electricity bills lowered substantially?
We can make this possible and the results are guaranteed.
Our concept has helped businesses and residential homeowners worldwide to

recover energy losses, by attacking the root of the problem, the hidden

inefficiencieswithin YOUR electrical system, and the energy company's systems.
 
HOW CAN WE DO THIS………  LEGALLY? 
By using basic electrical technology and our “RECIPE”  (Reactive Energy Controller

Including Power Enhancer).
 
The recommendations that we make will provide your facility with:
·         Improved power quality 
·         Increased production
·         Reduced electric bills
We can analyze your power usage and then will recommend electrical energy

saving solutions that will be cost effective, and make your existing plant more

efficient, and last longer  too.
Our energy saving systems are passive and require no employee monitoring or

maintenance. Our systems improve power quality while at the same time provide

significant savings of  5  to 18%, (possibly more), depending on your

unique facility. 

Our systems will normally recover your investment in 12 to 30 months, again

depending on the facility type, hours of operation and energy costs.  

You may feel that this is too good to be true, most of our customers are skeptical

at first, and who could fault them for that?  So we have devised a simple

common-sense demonstration, using recognizable components, to illustrate

exactly how we will produce these phenomenal savings for your business or

residence.

A demonstration is the first step on your road to increased profits and a more

efficient facility.
Once our System is installed at your facility, you will enjoy immediately lowered

electricity costs, as well as a host of "side benefits" attributed to the power

quality improvements created by our energy efficiency system.
The Manufacturers of the Energy Cost Saving devices  PTInc markets have been

supplying their products to their  customers on  the  Global market for more

than  60 years, combined.
When you have made your decision to reduce your overhead and increase

your profit margin, we will perform a survey, analyze the information, and

calculate the value of the savings available for your facility. After you have

studied and approved our proposal and recommendations we can implement

the system installation, and your savings will begin immediately.
 
At PTInc, we are dedicated to Improving Efficiency and saving our clients money.
Your satisfaction will always be our prime objective.
 
The Bottom-line.
Using our “RECIPE” Ener$aver product to increase the efficiency of your

power system allows your electrical motors to operate more efficiently and

draw less current through the distribution system in your building.
 
This reduced current draw translates into reduced kilowatt distribution losses.

These losses are very significant, and eliminating them produces a savings

in your electricity bill.
 
Our product eliminates these losses by canceling the magnetizing current

demanded by all of your inductive loads such as motors and transformers,

and thereby relievingyour building’s electrical system from carrying this

extra current.
 
The Concept: Saving Your Electricity Costs Intelligently.
If you use electrical equipment with motors, you can profit from our products.

AC induction motors are the single most common form of electromechanical

engineering in the world, accounting for as much electricity consumption as

anything else combined! In industry, for example, almost 70% of all electricity

is consumed by equipment with motors.
Today, high-energy cost and consumption is one of the major problems

facing industry today, causing many companies small and large to struggle

to maintain profit levels and remain competitive in the marketplace.
Incredibly, a motor can consume almost twenty times its initial cost each year!

Although motors play a vital role in the production of almost all products we use

and consume, there are several problems associated with their operation-all

of which can have serious cost implications. Industry is paying dearly for these

inefficiencies, and this is having a direct effect on our bottom line profits.
 
In reality, much equipment with motors are working significantly below their

design capacity.
When a motor is operating under less than FULL LOAD a large amount of energy

is being wasted.
In typical applications, levels of utilization are approximately 50% with power

losses estimated to be between 30% and 70% of the motor full load rating.
Unfortunately equipment with electrical motors/compressors has no way of

intelligently adjusting or controlling the amount of electricity they draw in

relation to the work they do.
It is there for clear, if you could intelligently monitor and reduce the power drawn

by a machinery with an electric motor to match its actual need under variable

load conditions, then you would open up an enormous energy saving opportunity.
Here is where our “RECIPE” Ener$aver equipment assemblies can help you.
 
 
RESIDENTIAL.
We use one of our new products to create lower power bills and improve the

efficiency of A/C units, refrigerator and pumps.
For a limit time, we are offering a great deal for business and homeowners.
We can install a system in your home using the same expertise and product

we offer our commercial customers.
You too can benefit!
You will see savings of  5----18%, depending on your application.
 

What does that mean to you?
 
Here is an example based on a supermarket in a residential area.

COMMERCIAL.
This is a synopsis of the results of a survey for a facility, a local  supermarket.

 
Power usage:
Lighting                      5.73%
Airconditioners          31.67%
Refrigeration             60.83%
Resistive                     0.03%
Equipment                  1.74%
 
Power costs:
Before “RECIPE” Ener$aver Installed:
High               $1763.00
Low                $1124.00
Average        $1406.00
 
After installing “RECIPE” Ener$aver units:
High               $1498.00
Low                $955.00
Average        $1195.00
Energy Cost  Savings: 15.0%!
Cost of “RECIPE” Ener$aver systems installed:         $4493.00
Annual savings: $2532.00!
Payback period  in years: 1.77  years or about : 21.¼  months!
Rate of return of “Your Investment” (ROI) 56%!
It is quite obvious that our “RECIPE” Ener$aver units will pay for

them self’s in a very short time indeed, hereafter your energy savings

will be net profits!
 
Please call for an appointment at: Tel : 736-1353  when you have

made your decision to reduce your overhead and increase your profit margin.