Energy Saving Products for Residents

Bye Bye Standby Energy Saving Starter Kt

                    

Energy Saving Starter Kit
Save energy, money and the environment

How to Use

Simply plug an electrical device into the Bye Bye Standby® Smart Socket, and this will enable you to take that device off standby when it is not in use - either by using the remote control or the switch on the socket itself. By combining with a 4-way extension lead, you can control up to four appliances with one Smart Socket.

The kit is easy to extend by adding further Smart Sockets or other items from the Bye Bye Standby range (see full product list here). The remote control can be used to operate up to six different groups of devices independently, or to switch everything off or on at once (e.g. when you leave the house / go to bed).

Features

  • Wireless remote control
  • On/Off function
  • Group control (enables multiple devices/lights to be controlled at once)
  • Operable control distance – up to 30m

Important

  • For indoor use only
  • Keep away from all sources of water or moisture
  • Suitable for appliances up to 3000W (13A)*
  • Not for use with any electrical devices containing a heating element, such as an electric fire.
  • Do not overload. Adult installation only.
  • * Maximum load refers to UK product. Specifications may vary for BBS products designed for other regions.

Specifications

Voltage: 240VAC/50Hz
Maximum load: 3000W (13A)
On/off indication: LED
Remote range: up to 30m
Battery type: 12VDC/MN21
CE approved
Troubleshooting

If the unit does not work:

  • Check the battery in the remote control
  • Ensure you are using the units within the operable range (up to 30 metres)

Instructions

Download the instructions here

Extend this kit..


Bye Bye Standby Expansion Pack

                    

Bye Bye Standby Expansion Pack - two additional smart sockets
Switch off even more products when not in use!

Features

  • Wireless remote control
  • On/Off function
  • Group control (enables multiple devices/lights to be controlled at once)
  • Operable control distance – up to 30m

Important

  • For indoor use only
  • Keep away from all sources of water or moisture
  • Suitable for appliances up to 3000W/13A
  • Not for use with any electrical devices containing a heating element, such as an electric fire
  • Do not overload. Adult installation only.

Specifications

Voltage: 240VAC/50Hz
Maximum load: 3000W
On/off indication: LED
Remote range: up to 30m
Battery type: 12VDC/MN21
CE approved

Troubleshooting

 If the unit does not work:

  • Check the battery in the remote control
  • Ensure you are using the units within the operable range (up to 30 metres) 

Bye Bye Standby Wall Switch

 

                     

Wall Switch
Control multiple devices at the touch of a button!

Features

• Wireless wall switch transmitter
• On/Off function
• Operable control distance – up to 30m
• Dimmer function for incandescent lights (when used with Bye Bye Standby® Energy Saving Lamp Dimmer.)
• 256 possible code combinations

     House Codes            Unit Codes

Important

  • Keep away from all sources
  • of water or moisture.
  • Adult installation only.

Troubleshooting

If the unit does not work….
• Check the battery in the transmitter
• Ensure you are using the units within the operable
range.
• Check the House and Unit Codes are compatible
on the transmitter and receiver.
• Check LED power On indicator on the receiver

Specifications

• Dimensions (mm): 75 x 75 x 15
• Frequency: 433.92MHz
• Remote range: 30m
• 12V batter operated (battery included.)


Bye Bye Standby Motion Sensor

 

                         

Motion Sensor
Control your appliances through motion detection. 

This PIR (Passive Infrared) Motion sensor can be used in conjunction with the Bye Bye Standby® Smart Sockets to give appliance control through motion detection.

Features

Adjustable detection range up to 10m.
• Can send commands through walls and ceilings
up to 25m.
• Adjustable time frames
• 256 possible codes (A-P and 1-16)
Important
For indoor use only. Keep away from all sources of water or moisture.
Adult installation only.

      House Codes           Unit Codes

Troubleshooting

If the unit does not work….
• Check the batteries are installed correctly
• Ensure you are using the units within the operable range.
• Check the House and Unit Codes are compatible on the transmitter and receiver.
• Check the setting on the TIME is as required.
• Adjust the angle until the required detection area is reached.
• If the AUTOMATIC setting is being used and the system starts to early this can
be adjusted.

Specifications

• Transmitter range: up to 25m
• Detection range: up to 10m
• Angle of detection: 110°
• Detection battery life: standby minimum 12 months
• Battery type: 3 x AAA alkaline battery 1.5V
• Time-on adjustment: 4 seconds to 5 minutes 


Bye Bye Standby Lamp Dimmer

 

                              

Lamp Dimmer
Create lighting moods at the touch of a button, AND save energy!

 

Features

• Wireless remote control
• On/Off function
• Dimmer function for incandescent lights
• Group control (enables all devices/lights to be
controlled at once)
• Operable control distance – up to 30m
• 64 possible codes

      House Codes            Unit Codes

Important

  • For indoor use only.
  • Keep away from all sources of
  • water or moisture.
  • Suitable for appliances up to 300W.
  • Not for use with any electrical devices containing a heating element, such as an electric fire. Do not overload. Adult installation only.

Troubleshooting

If the unit does not work….
• Check the battery in the transmitter
• Ensure you are using the units within the operable
range.
• Check the House and Unit Codes are compatible
on the transmitter and receiver.
• Check LED power On indicator on the receiver

Specifications

• Frequency: 433.92MHz
• Power: 220/240V 50Hz
• Maximum load: 300W
• Operating voltage: 230v/50hx
• Remote range: 30m
• CE 0560 approved


Bye Bye Standby In-Ceiling/ Back Box Switch

 

Replace existing light switches with an energy saving alternative and control your home wirelessly.

 

 

  • Wireless on/off function for use with ceiling lights and outdoor lights
  • Operating range of up to 10 meters, works through walls and ceilings
  • Use with the extensive range of Bye Bye Standby energy saving products

Please note that this product does not work in isolation, use with a Bye Bye Standby Remote Control, Key Fob Remote Control, Wall Switch, Motion Sensor or Online Controller.

Installation

  • Disconnect mains power before installation
  • Connect power feed to “L” IN and “N” IN
  • Connect light /device to “~” OUT and “N” OUT (NB The "~" output is sometimes referred to as the "Switched Live" output)
  • Fix the units in place using the mounting holes on the side of the unit
  • Double check wiring before reconnecting to the mains
  • Make sure your ceiling switch is set to the same letter and number codes as your Bye Bye Standby remote control or wall switch. Use any combination of letter codes from A-H and number code from 1-8 but ensure that these correspond with your chosen transmitter

IMPORTANT

  • In the interests of safety, please switch off power before connection.
  • Do not overload, suitable for filament lights up to 1000W.
  • Keep away from all sources of water, moisture or flammable products.
  • Do not place two receivers within an distance of 1 meter from each other.
  • Use only as directed.
  • Electricity Kills. If you are unsure about any aspect of the installation or operation of this product, you should contact a suitably qualified electrician.

Specifications

  • Frequency: 433.92MHz
  • Requires a neutral connection
  • Operating Voltage: 220V - 240V, 50 Hz
  • 256 Digital Codes
  • Max load: 1000Watts (Resistive load)
  • Designed in the UK, made in China 

Instructions

Download the instructions here


Bye Bye Standby In-ceiling Halogen Transformer

 

Replace existing low voltage halogen transformers with an energy saving alternative and control your home wirelessly.

  • Works with standard low voltage halogen lights
  • Wireless on/off and dimming functions
  • Operating range of up to 10 metres, works through walls and ceilings
  • Use with the extensive range of Bye Bye Standby energy saving products

Please note that this product does not work in isolation - use with a Bye Bye Standby Remote Control, Wall Switch, Motion Sensor or Online Controller.

 

Installation

Replace existing halogen transformer with this unit
Select the unit and house code using a dial on the under side of the unit

IMPORTANT

  • In the interests of safety, please switch off power before connection.
  • Do not overload, suitable for low voltage halogen lights up to 150W
  • Keep away from all sources of water, moisture or flammable products.
  • Do not place two receivers within an distance of 1 metre from each other.
  • Use only as directed.
  • If you are unsure about any aspect of the installation or operation of this product, you should contact a suitably qualified electrician.

Specifications

  • Frequency: 433.92MHz
  • Requires a neutral connection
  • Operating Voltage: 220V - 240V, 50 Hz
  • 256 Digital Codes
  • Max load: 150Watts (low voltage halogen lights only)
  • Designed in the UK, made in China 

Bye Bye Standby Online

RANGE - FEATURES - HOW IT WORKS - DEMONSTRATION

Online Controller

The Bye Bye Standby® Online Energy Controller provides you with a user-friendly and affordable energy control system for the home or office that is simple to install and manage. Electronic devices can be easily controlled and monitored using the internet or your mobile phone/PDA*, allowing for an easy to use energy management solution. You can even make your home less vulnerable by simulating occupancy while you are away by switching on devices remotely such as lighting and a radio.

*Compatible with a standards compliant mobile web browser i.e. Internet Explorer or Firefox                

 


Bye Bye Standby 1-Way Extension Lead

 

     

  • Compatible with Bye Bye Standby Smart Sockets
  • 12 months manufacture warranty
  • Low profile design for better under-desk space utilisation
  • "easy plug" socket
  • 0.5 metre extension cable fitted
  • Fused for safety
  • BS1363/A certified, CE certified
  • Suitable for rapid PAT testing

The Bye Bye Standby 1-Way Extension typically allows a complete workstation to be plugged into a single Bye Bye Standby Smart Socket, thus maximising the benefit that can be achieved from the Bye Bye Standby system (please check power ratings of the equipment first to ensure that the Smart Socket is not overloaded).

The robust design not only minimises down time due to equipment failure / replacement but also allows for a 12 month manufacture warranty on the product.

Specifications

Physical

  • Energy use: 0w (standby and operational)
  • Storage: -15 degrees C to 50 degrees C
  • Operation: 3 degrees C to 40 degrees C
  • IP rating: none, designed for general office use
  • Cable supplied: 1m
  • Connections: 1 x UK power socket

Hardware

  • Fuse fitted: standard blow speed 13A
  • Max loading of socket: 13A

Approvals

  • Approvals: BS1363/A approved, CE approved
  • 12 months warranty

Bye Bye Standby 4-Way Extension Lead

 

  • Compatible with Bye Bye Standby Smart Sockets
  • 12 months manufacture warranty
  • Low profile design for better under-desk space utilisation
  • 4 "easy plug" sockets connect to one plug
  • 1 metre extension cable fitted
  • Fused for safety
  • BS1363/A certified
  • Suitable for rapid PAT testing

The Bye Bye Standby 4-Way Extension typically allows a complete workstation to be plugged into a single Bye Bye Standby Smart Socket, thus maximising the benefit that can be achieved from the Bye Bye Standby system (please check power ratings of the equipment first to ensure that the Smart Socket is not overloaded).

The robust design not only minimises down-time due to equipment failure but also allows us to offer a 12-month manufacture warranty on the product.

Specifications

Physical

  • Energy use: 0w (standby and operational)
  • Storage: -15 degrees C to 50 degrees C
  • Operation: 3 degrees C to 40 degrees C
  • IP rating: none, designed for general office use
  • Cable supplied: 1m
  • Connections 4 x UK mains power sockets

Hardware

  • Fuse fitted: Standard blow speed 13A
  • Max. loading of any individual socket: 5A
  • Max. combined loading: 13A

Approvals

  • Approvals: BS1363/A approved, CE approved
  • 12 months warranty

 
Designed & developed by Hyperlife Technologies Ltd.